TezSafety Series Class2 A2 Microbiological Safety Cabinets

Class 2 Microbiological Safety Cabinets (MSC) are devices that provide high security, protecting employees, the environment and their products. The design of these cabinets allows for the safe intake of biological agents through the correct direction and filtration of air. Airflow and Filtration: Class 2 Biological Safety Cabinet, the flexibility of operation begins with air being drawn in and this air is stored in the HEPA filters at the bottom of the cabinet and then thrown out. This arrangement directs the operator, product and environment through the air in the form of particles. The ventilation system ensures that 70% of the air is circulated in the cabinet, while 30% is equipped as filtered exhaust air.

Tez Safety Series CLASS II A2 Cabinet TECHNICAL SPECIFICATIONS

The biologically contaminated plenum is under negative pressure or surrounded by negative pressures.

Air sources: %30 Exhaust %70 Internal Circulation

Control Electronic Control System

HEPA Filters 2 Units Production in accordance with 12469 Standards

Control panel has filter life hours, UV times hours, window opening and closing, fan controls, fan efficiency, front camera barriers condition, all alarms, UV countdown timing, device total operating time

TSK-90 External Dimensions: 1050 x850x 2200 mm Internal Dimensions: 900 x 630 x 625 mm LCD Controls

TSK-120 External Dimensions: 1340x850x 2200 mm Internal Dimensions: 1190 x 630 x 625 mm LCD Controls

TSK-150 External Dimensions: 1640 x850x 2200 mm Internal Dimensions: 1490 x 630 x 625 mm LCD Controller

Tezsafety TSK-120 MGK Cabin Technical Specifications

Internal Dimensions (WxLxH) mm 1190x630x625

External Body Dimensions (WxLxH) mm 1340x850x1450

Carrier Stand Dimensions (WxLxH) mm 1340x850x745

Working Floor Height from Ground 840 mm

Air Flow Rate (m/s) Inlet 0.50 ± %5 Down Flow 0.38 ± %5

HEPA Filter Type (EN 1822)

Main Filter H14 HEPA 0.3 µm %99.995

Exhaust Filter H14 HEPA 0.3 µm %99.995